Rietz® Disintegrator
 Rietz® RD Series Disintegrator
Exceptionally
versatile Rietz® mills give outstanding performance in the following
process functions:
- Dry pulverizing to coarse or fine grind
- Wet grinding to produce slurries or pastes
- Shredding of difficult-to-grind materials that
are high in moisture and/or oil
- Defiberizing, dissolving, dispersing
- Fine pulping of soft fruits and vegetables
The Vertical Disintegrator from Rietz® is available in rotor diameters from 8"
to 24", and from 5 HP to 200 HP. Materials of construction
meet the needs of the application. RD's are available in
all cast iron and carbon steel, in partial stainless steel, or in
all stainless steel. Operating speeds run up to 8,400 RPM, depending
on rotor diameter. Wide choices of hammer styles and screen sizes
are available for the disintegrator.
 |
Rietz® RP
& RA Series Disintegrator - widely used
for fine pulping of many food products, and for fine
dispersing and homogenizing in both the food and chemical
industries. In addition, this
|
Rietz® disintegrator has the capability of doing high-speed shredding
and wet grinding of many fibrous and other extremely tough materials. |
 Rietz®
RI Series Disintegrator - specifically designed for
in-line installation, where they function without impeding the
process flow. Their primary applications of these disintegrators are mixing, delumping
and dissolving of fluids, slurries and pastes, and the grinding
and separation of high fiber solids. They operate under vacuum,
or under pressures to 150 psig. at rates up to 500 gpm. Rietz® RI models
are available in all carbon steel, all stainless steel, or in
combinations or carbon and stainless. Elastomer lined body may
be specified. Rotor diameter sizes of these disintegrators range from 6" to 24",
with power input from 5 HP to 200 HP |
|
