MS SERIES ROLL BRIQUETTERS
 Along
with standard industrial grade equipment, Bepex International can
offer equipment, like our Roll Briquetters, specifically suited to your individual process requirements.
Bepex International specializes in the tough applications, especially
when product quality and cleanliness are concerns. All Bepex International
briquetters are manufactured to the same robust standards.
The Bepex International Briquetter will produce specific shapes
depending on the roll pocket design to produce the briquettes you need. Typical products range from
‡" up to 8" wide. The compaction forces can vary
from 10 to 900 tons, creating a hard product that will resist attrition.
In many cases, a binder is not required to produce these briquettes, thus this process is more
economical than competitive systems.
Briquettes provide control of surface area and airflow for better
combustion or reaction. The attractive form provides convenience
for the final application.
This is a diagram of a Standard Briquetting System. In this briquetting system, powder feeds
and a liquid binder (if necessary) are fed into a premixer. The
premixed feed is then fed to the Briquetter to form the final product.
Product shape is determined by the shape of the rolls. The product
is dropped onto a screener to sift out any fines present. The fines
are recycled to the mixer.
Typical Applications for a Briquetting System
- Salt
- Metallic ores
- Charcoal
- Refractory materials
- Carbon enhancing materials
- Malcic Anhydride
- Metal powders
- Water treatment chemicals
|
